Lumidigm M30x & V30x Driver Installation:
*Please note, do not plug in the scanner until after you install the drivers*
Download Link: M30x_V30x Drivers and Demo
For the Lumidigm M30x and V30x scanners, you will need to go through 3 different installations: The Device Service, the Driver Software Download, and the Driver Installation
The driver download will be a zipped folder which will need to be saved locally to your machine. A good example would be your desktop.
You will need to extract the contents of the folder by right clicking on the folder and choosing “Extract All”
A new window will pop up asking where you want to save the unzipped folder. If you keep the default location, the unzipped folder will save to the same location as the zipped folder.
Double click the unzipped folder to view the contents. There will be 4 folders and 1 Demo installer inside. For the M30x and V30x scanners, you will need to install the Device Service first. Once the Device Service is installed, we will come back to this folder to install the Drivers. Open the DeviceService folder.
In the DeviceService folder you will see 1 installer. Double click on “LumidigmDeviceServicePackagesSetup” to start the installation wizard.
You may get a Security Warning pop up; Click on “Run”
A new window will pop up showing for the Installation Wizard. Click “Next” to get started.
The next Window will be a License Agreement; You will need to “Accept” to continue. Click “Next”
The next Window will ask you what type of setup you would like. Choose “Complete”
The next window will show the progress of the driver installation.
Once the installation is complete, you will see a window like below; Click “Finish”
Now that the Device Service is installed, we will go back to the LumidigmDrivers_Demo folder to install the Drivers. Open the Driver Installers folder.
In the Driver Installers folder, you will see 1 folder and 1 installer. Double click on “Drivers_V30X_M30X” to start the installation wizard.
A new window will pop up showing the status of the Install Preparation.
Once the preparation is complete, you will see a window like below. Click “Next” to continue.
The next Window will be a License Agreement for this install; You will need to “Accept” to continue. Click “Next”
The next window will confirm that you want to continue with the installation. Click “Install”
This will take you to a window that will show the progress of the Driver installation.
Once the installation is complete, you will see a window like below. Click “Finish”
Now you will need to navigate to the location: “C:\Program Files (x86)\Lumidigm Release v5.10.32\Drivers V30x M30x”. Choose the correct folder for your machine.
In this folder, you will see 1 folder and 5 other items. Double click on “dpinst” the application.
This will start a new Installation Wizard. Click “Next” to continue
The next Window will be a License Agreement for this install; You will need to “Accept” to continue. Click “Next”
You may get a Windows Security pop up. Check “Always trust software from Lumidigm, Inc” then click “Install” to start the driver installation
This will take you to a window that will show the progress of the driver installation
Once the installation is complete, you will see a window like below. Click “Finish”
You can now plug the scanner into your machine.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article