FbF® mobileOne App
Posted by on 23 October 2015 12:02 PM
FbF® mobileOne App Version 2.0 for iOS:
To download the free FbF® mobileOne demo app, go to the App Store on the iOS device and search “mobileOne”.
Once the app is downloaded, launch the app, and you will see the screen below.
Once you plug in the mobileOne QuickDock to the iOS device, you will see the print capture screen.
You can now capture a print.
If you click on the info button on the bottom right, you will be able to view the QuickDock’s battery percentage and battery voltage:
The settings button is in the bottom left corner. This is where you will choose how to save your prints.
When you first enter Settings, you will need to enter a Device ID and an Operator Name. Click on the arrow to the left of Configuration to exit settings. If you do not wish to save your prints, select “Don’t” option.
Saving Prints to File
You can choose to save the prints to the iOS device using the “File” option.
To retrieve a print that is saved to the iOS device, plug the iOS device into a computer then launch iTunes. The prints are automatically titled as the date and time you saved the print.
With the iOS device plugged in and iTunes running, please complete the following steps to access your prints:
You can save the print to your computer from here and change the file name as needed.
You can choose to send the captured print to an email address.
You can enter additional information in the subject or body of the email.
Uploading Prints through FTP
You can also choose to upload the prints through FTP.