Knowledgebase
Suprema RealScan Driver Installation
Posted by on 12 February 2015 12:55 PM

Suprema RealScan Driver Installation:

*Please note, do not plug in the device until after the drivers are installed.*

 Please download the RealScan Drivers here: Suprema RealScan Drivers

The driver download will be a zipped folder which will need to be saved locally to your machine.  A good example would be your desktop.

You will need to unzip the folder by right clicking on the folder and clicking on “Extract All”

This will pull up a new window where you can select the location you want the unzipped folder to be saved. If you leave the default location, the unzipped folder will be put in the same location as the zipped folder.

Double click on the unzipped folder to open it. There will be 2 installers located in the folder. Choose the installer for your machine (32-bit or 64-bit); Double click to run the installer.

A Security Warning may pop up. Click “Run”

This will start the Installation Wizard. First, you will see a screen like the one below, while the wizard prepares the installation.

Once the preparation is done, you will see a screen like below. Click on “Next”

The next screen will show the progress of the driver installation.

When the installation is complete, you will see a screen like below. Click “Finish”

The drivers are now installed.