Knowledgebase: Driver Installations
Suprema Fingerprint Driver Installation
Posted by on 12 February 2015 12:46 PM

Suprema Fingerprint Driver Installation:

*Please note, do not plug in the scanner until after you install the drivers*

 

These drivers are compatible with the following fingerprint scanners:

BioMini, BioMini Slim, BioMini Plus and BioMini Combo

 

The driver download will be a zipped folder which will need to be saved locally to your machine.  A good example would be your desktop.

You will need to extract the contents of the folder by right clicking on the folder and choosing “Extract All”

A new window will pop up asking where you want to save the unzipped folder. If you keep the default location, the unzipped folder will save to the same location as the zipped folder.

Double click the unzipped folder to view the contents. There will be 1 installer inside the folder. Double click the Installer “Sup_Fingerprint_Driver_v2.1.0” to start the Installation Wizard.

You may get a Security Warning pop up; Click on “Run”

A new window will pop up showing the preparation status for the install.

Once the preparation is complete, you will see a window like below; Click “Next” to start the driver install.

The next window will show the progress of the driver installation.

Once the installation is complete, you will see a window like below; Click “Finish”

You can now plug the scanner into your machine.